Both Type I & II, and Class C2 & Class N, in Yellow or Green are available.         Unit of Sealer It withstands temperatures of 350ºF with peak to 450ºF. Contact us for details. Anyone who thinks the Space Needle in Seattle looks cleaner these days is right, thanks to the scrubbing it got over the summer from a German cle... Face it, it's time to stop the mop and get serious about clean floors. Description: This metal pretreatment coating compound is a two-component, quick dry etch primer designed for use on aluminum, galvanized steel, and ferrous substrates to ensure good adhesion of subsequent primer coats. Contact us for details. being slippery. sizes: pints, quarts, and gallons. TT-T-306: Thinner, Synthetic Resin Enamels. Please shop our products for all your essential needs. Previous revisions may be available. Conformance: This product conforms to MIL-E-16663 Revision A (the latest Revision). Conformance: This product conforms to MIL-T-81772, Type I, II or III Revision B (the latest Revision). TT-T-306: Thinner, Synthetic Resin Enamels. Floors are always going to be a hot spot when it comes to dirt, debris and p... Mon - Fri   8:30am - 4:30pmSaturday   ClosedSunday   Closed. Description: This is a high solids, oleoresinous based moisture and fungus resistant varnish with excellent interior and exterior durability. Gallons ................. 4 to case, SEMCO Two Part Cleaner Available in four sizes - One each of Part 1 and Part 2 117 for Metals). This VOC compliant primer is lead and chromate free, and is suitable for use under synthetic enamel or lacquer topcoats. This epoxy polyamide coating is intended for use on properly cleaned and pretreated ferrous and non-ferrous substrates to provide corrosion and chemical resistance. This yellow primer is suitable as an after blast or after pickling primer for plating, as an undercoat for alkyd enamels, and for equipment where a quick drying primer is not required. Description: Our Simflex-118 pretreatment wash primer is a two-component, quick dry etch primer specifically formulated with zinc molybdate based corrosion inhibitor and is designed for use on aluminum, galvanized steel, and ferrous substrates to ensure good adhesion of subsequent primer coats. (See Diagram #1 below). This specification covers a thinner for synthetic resin enamels. Conformance: This product conforms to TT-E-489 Revision J (the latest Revision). -                Conformance:  This product conforms to MIL-PRF-23377 Revision K (the latest revision). SEMCO Clear Coat can be applied by itself or over SEMCO Teak Sealer. This enamel is lead and chromate free and it may be applied by brush or spray and is suitable for any primed metal or wood structure. Semco Coverage:  Approximately 8-10 or 340 g/l. It is intended for use as a transparent exterior protective finish coating for wood and metal. MIL-P-24441 TYPE I: Epoxy Polyamide Paint. MIL-PRF-4556: Epoxy Coating Kit for Interior of Steel Fuel Tanks. DIAGRAM #4 -, [ Who We Are ] [ Semco Products ] [ Teak Care ] [ Furniture Care ] [ Our Clients ] [ Order Form ] [ Find Semco ] [ Contact ], Copyright © 2001-2015 Semco Teak Products, Inc. The family feel can’t be beat. MIL-T-81772 Type I, II, & III. It is lead and chromate free. It can be used on primed, smooth metal, glass reinforced plastic (GRP) wood and plastic/composite surface. This green primer has a maximum VOC of 2.08 lbs/gal. teak without harsh scrubbing to remove graying, fish blood, fuel stains and teak oils.         Stirring Stick The coating, furnished as a kit, is lead and chromate free having a maximum VOC of not more than 2.80 lbs/ gal. Description: Milguard-22750 is a two part VOC compliant epoxy polyamide based coating specifically formulated for protection of areas exposed to chemicals and solvents. Conformance:  This product conforms to TT-P-664 Revision D. PRIMEGUARD-1757 Fast Dry Rust Inhibitive Alkyd Primer. Description: The paint covered by this specification is a high solids, VOC compliant, non-flaming (dry), semi-gloss finish. The paint is not intended to prevent the burning of wood or other combustible substrates, but will retard combustion to a limited extent. Conformance: This product conforms to TT-T-306, Revision E (the latest Revision). The resultant finish is high heat and weather-resistant and exhibits prolonged durability and color retention compared to conventional alkyd coatings. Revised: I've been buying cleaning supplies for my dog grooming salon (The Friendly Groomer) from Semco since we opened. Conformance:  This product conforms to MIL-C-46168 Rev.         Application Brushes Semco is a family-owned and operated sanitation supply and equipment distributor. TT30 is a single pack, acrylic topcoat, suitable for aerospace applications. Conformance:  This product conforms to MIL-PRF-23236 Revision D (the latest revision), Type V, Class 5 or 7. They have always been extremely helpful and a pleasure to work with. Description: This specification covers a series of primers & paints that are epoxy polyamide, two component, and lead and chromate free. Conformance: This product conforms to TT-V-51, Revision F (the latest Revision). MIL-E-16663: Semi-Gloss Enamel for Metal Surfaces of Ammunition and Ammunition Containers. Conformance: This product conforms to MIL-DTL-15090 Revision D. Conformance to previous revisions of MIL-E-15090 are also available. Conformance: This product conforms to MIL-E-1115 Revision D. MIL-DTL-11195: HAPS Free, VOC Compliant, Fast Dry, Lusterless Enamel Ammunition Coating. It is the class most widely used especially on railroad coaches, bridges, storage tanks and general construction work. It is intended for use as a transparent and aluminized exterior protective finish coating for wood, metal and doped fabric. sand, earth). Conformance:  This product conforms to MIL-DTL-24441 Revision D (the latest revision). It dries to a smooth, lustrous, and transparent finish. Contains everything needed for complete teak restoration all in one package. Conformance: This product conforms to MIL-T-81772, Type I, II or III Revision B (the latest Revision). 30. Conformance: This product conforms to TT-E-516 Revision A (the latest Revision). Previous revisions may be available. Contact us for details. Conformance:  This product conforms to Federal Specification TT-P-1757 REV B, Type (I or II), Class -C       Chromate Based Corrosion-Inhibitors, Class- N       Non-Chromate Based Corrosion-Inhibitors, Color -T       Green (Fed-Std-595, Color # 34151), MIL-C-8514: Metal Pretreatment Coating Compound. Conformance: This product conforms to TT-P-320 Type II, Class B, Revision D (the latest Revision).         Complete Use & Care Peggy is always very friendly when I call in for our order and we always get what we want. Description:  MIL-C-46168 is a two component, lead & chromate free, polyester/aliphatic polyurethane coating for use as both a camouflage and non-camouflage finish coat on military combat equipment. We offer store pickups,  deliveries to London, Ontario, and Canada Post shipping Canada-wide. 117 for Metals). Contact us for details. It serves as an undercoat for enamels when used on wooden construction and is also suitable for use as an aluminum vehicle. It is intended for application over previously, primed or painted surfaces of ships interior metal bulkheads. E (the latest Revision), Type I or Type-II, Class H. Conformance to previous revisions of MIL-PRF-85285 and MIL-C-85285 may be available. Description: A one component, pure silicone based pigmented finish specially designed to withstand 1000 ºF constant temperatures and intermittent 1400ºF exposure. 2.3 Other hazards 2.1 Classification of the substance or mixture 3. Product name MONT MARTE KIDS POSTER PAINT 2. Conformance:  This product conforms to MIL-PRF-85285 Rev. Contact us for details. TT-V-119 (MILVAR-835): Varnish, Spar, Phenolic-Resin. Contact us for details. Conformance: This product conforms to MIL-V-16399, Revision A (the latest Revision). Known the world over as the best protection for Description: Standard Grade Leafing Aluminum Paste is a medium sized flake paste with excellent moisture-barrier characteristics and has good reflectivity and hiding. This specification covers a thinner for synthetic resin enamels. They are recommended to be used for painting both land and marine structures and protect structures from environmental attack. Conformance: This product conforms to MIL-PRF-24635 Type II, Revision E (the latest Revision). Check out our newest newsletter and subscribe below for our monthly additions: Spotless glass, mirrors, PlexiGlass, and more! The wash primer is not intended to be used as a permanent protective coating in itself. It dries with a smooth, black, lustrous finish (similar to black enamel). HAZARDS IDENTIFICATION NOT CLASSIFIED AS HAZARDOUS ACCORDING TO SAFE WORK AUSTRALIA CRITERIA 2.2 Label elements No signal word, pictograms, hazard or precautionary statements have been allocated. Conformance: This product conforms to TT-E-527 Revision D (the latest Revision). TT-E-490: Enamel, Silicone Alkyd Copolymer, Semigloss. Sign up for our mailing list to receive new product alerts, special offers, and monthly newsletters. Contain spills immediately with inert materials (e.g. Contact us for details. (340 g/l) at application. Conformance:  This product conforms to TT-P-645 Revision C. TT-P-664: Corrosion Inhibiting, Lead & Chromate Free, VOC Compliant, Alkyd Primer Coating. Conformance:  This product conforms to MIL-P-24441 Revision B. MIL-DTL-24631: Paint for Submarines (Formula 184, 186, & 187). Description: Specification TT-E-489 covers an alkyd high gloss enamel suitable for use on primed exterior & interior wood and metal surfaces. SEMCO Teak Products are sold in three         Unit of Cleaner  pieces of furniture per gallon for initial 2-coat application. If required, TT30 can be removed using a suitable paint remover without detriment to the underlying primer. AASHTO-M-69-70 (MILVAR-839): (MILVAR-839): Aluminum paint M-69 is based on an oleo-resinous water resisting spar varnish and leafing type Aluminum Paste. It is particularly suited for painting of indoor water and gas pipes. Description: The coating covered by this specification is a one component, fast drying, lusterless, HAPS free, corrosion inhibiting alkyd enamel for use on primed metal substrates and on ammunition components. Highly recommend! It dries to a smooth, lustrous transparent hard finish. 211 Gunther Ln, Belle Chasse, LA 70037, USA. Conformance:  This product conforms to MIL-DTL-53022 Type II, Revision E (the latest Revision). Description: This pretreatment wash primer is a two-component, quick dry etch primer designed for use on aluminum, galvanized steel, and ferrous substrates to ensure good adhesion of subsequent primer coats. Conformance to previous revisions of MIL-PRF-24635 and MIL- E-24635 may be available. The dried film of the varnish is resistant to water and lubricating oil. Description: The light gray semi-gloss enamel covered by this specification is an air dry, VOC compliant solvent base suitable for use as a topcoat on equipment, machinery, furniture and electrical equipment such as switchboard installations in marine service.

Kiss Me, Kate Lyricist, Take Ya Home Feat Pharrell, Delia Smith Chocolate Sponge Cake, What Does China Import, Brookstone Weighted Blanket Reviews, Foil Pans With Lids, 20cm Cake Tin Loose Base, Rare Xbox 360 Games 2019,